Product information:
The THE intake hose is specially designed for use in the RS4/S4 B5. The inner diameter is 102mm and can be mounted directly on our large MAF housing. To prevent the hose from contracting, two additional steel rings were used. The other side is made that our 102mm intake Y can be mounted (see picture/red Y). With the help of the adapters, which can be ordered separately, it is possible to install the OEM RS4 MAF and/or the OEM RS4 Intake-Y. If both adapters are installed, this hose can also be used as a replacement for the OEM RS4 intake hose.
This hose will also be used in the future in various other projects from us, such as RS3/TTRS. The THE- intake hose can also be universally installed in other engines.
Advantages over the OEM / silicone hose:
- More throughput due to larger diameter
- More flexible than a silicone hose
- The corrugation can compensate for a slight angular misalignment
- Two additional steel rings have been inserted to prevent contraction
- With the help of our adapters, a wide variety of expansion stages can be realized with it
Key information:
- Inner diameter: 102mm
- Total length: 215mm
- Angle of the hose: 35° +-
- Material of the hose: TEEE (same as various OEM hoses)
- Galvanized steel rings
Additional information:
- Reducer adapters must be ordered separately as needed
- Universal use - can be used for various self-built intake systems
- When used with our intake Y, the hose must be shortened on the side of the intake Y
- Depending on the installation position of the motor, the side to the MAF housing can be shortened to the collar if required
- For an easier assembly we recommend to warm up the hose slightly (max. 60°C)
Scope of delivery:
- Intake hose incl. steel rings
- Two stainless steel hose clamps
THE-B5 006 04 THE-B5 006 05 THE-B5 006 03 o78129627P
