Product information:
These turbochargers are the third upgrade stage of our THE turbochargers. We recommend using these turbochargers for an application range of 650 to 750 hp. The THE- 600 is fitted with our THE- Upgrade 06 exhaust housing, which offers excellent response. A B03 core with reinforced radial and axial bearings is installed, which is also used in the current RS3 models. This core is the latest state of the technology and is designed for a very large impeller (compressor wheel 70mm, exhaust wheel 60mm). Only OEM BorgWarner parts are used for the core, except for the rear panel. Due to the B03 core, the original water lines cannot be installed - these are included with the turbocharger. The wastegates are reinforced by us with an additional spring.
Additional information:
- With these turbochargers, a maximum output of over 780 hp could be achieved - however, this has an effect on the durability of the turbocharger. For outputs above 750 hp, we recommend our next expansion stage!
- All performance data are approximate values that were achieved with our test vehicle - may vary depending on the engine configuration!
- The following components were installed in our S4 B5 test vehicle:
- OEM RS4 intake system with THE- 63mm fresh air pipes
- Exhaust system 90mm
- Pierburg system with one pump and 980cc Bosch injectors
- Wagner intercooler
- Intake cylinder heads, RS4 intake manifold, pistons & connecting rods
- Regular gasoline 100 octane
- For a Plug&Play installation on an S4, the lower fresh air pipes of an RS4 or our THE- Fresh air pipes be installed.
- The oil supply lines must be individually adapted or purchased separately from us - please specify when ordering whether you are using an S4 or RS4 engine block. We recommend replacing the oil supply line every time you replace the turbo.
Scope of delivery:
- Left and right turbocharger
- Water pipe set
